Copper wire is one of the most commonly used materials in electrical works. It's durable, flexible, and an excellent conductor of electricity. However, before you can use copper wire, you need to strip it of its insulation. This is where a copper cable stripping machine comes in handy. But, there are certain things you should avoid doing to ensure successful stripping.
In this blog, we'll discuss the common mistakes to avoid when using a copper cable stripping machine.
1. Don't Use a Wire Stripper that is Too Small or Too Large
The first mistake to avoid is using a wire stripper that is either too small or too large. If you use a tool that is too small, it will not strip the wire completely, leaving some parts with the insulation intact. On the other hand, if you use a tool that is too large, you will end up damaging the wire itself.
That's why you need to use a copper cable stripping machine that is the right size for your wire diameter. A good way to determine the stripping size is to check the manufacturer's specifications.
2. Don't Use a Dull Cutting Blade
Another mistake to avoid is using a copper cable stripping machine with a dull cutting blade. A dull blade will not cut through the insulation cleanly, resulting in a rough and uneven cut that can damage the wire strands. To avoid this problem, you need to ensure that the cutting blade is always sharp.
If you notice that the stripping machine is not working as it should, it could be an indication that the cutting blade needs sharpening or replacing.
3. Don't Strip the Wire Too Much or Too Little
One of the most common mistakes people make is either stripping the wire too much or too little. Stripping the wire too much will expose more than the necessary amount of copper wire, making it prone to damage during installation. It can also cause a short circuit or electrical hazard.
On the other hand, stripping the wire too little will leave some parts of the insulation intact, preventing the wire from conducting electricity effectively.
To avoid these problems, you need to strip the wire using the right amount of force. You can also adjust the stripping machine's settings to ensure that it strips the insulation at the right depth.
4. Don't Force the Wire into the Stripping Machine
Lastly, you should avoid forcing the wire into the stripping machine. Doing so will damage the wire or the stripping blade. Instead, you need to gently guide the wire into the machine and let it do the rest.
If you encounter any resistance, stop and check the wire for any obstructions. You can also try adjusting the stripping machine's settings to make it easier for the wire to pass through.
Conclusion
In conclusion, using a copper cable stripping machine requires proper handling and knowledge to ensure successful stripping. Avoid the abovementioned mistakes and follow the manufacturer's instructions to avoid damaging your wire or the stripping machine.
If you're looking for a reliable and efficient copper cable stripping machine, Cuttingtools9 offers high-quality machines that guarantee excellent results. Contact Cuttingtools9 today and get the best deal on the market!